Vizio E390-B1E - User Manual Manuel d'utilisateur télécharger pdf (Page 45)

Adjusting the CEC Settings

The CEC function on your TV enables you to control

HDMI-connected devices with the included remote without any

additional programming.

Not all HDMI devices support CEC. See your device’s

user manual for details.

To enable, disable, or adjust CEC settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight System

and press OK. The SYSTEM menu is displayed.

3. Use the Arrow buttons on the remote to highlight CEC and

press OK. The CEC menu is displayed.

4. Use the Arrow and OK buttons to adjust each setting:

• CEC - To use CEC, you must select On.

• System Audio Control - When system audio control is on,

you can control your device’s audio using the TV’s remote

control.

• Device Discovery - Use this function to determine if your

device is connected and supports CEC.

5. Press the EXIT button on the remote.

Turning the Power Indicator On or Off

The Power Indicator on the front of your TV normally does not

glow when the TV is on. You can change this setting if you prefer

the light to be on.

To turn the Power Indicator Light on or off:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight System

and press OK. The SYSTEM menu is displayed.

3. Highlight Power Indicator and press OK. The POWER

INDICATOR menu is displayed.

4. Use the Up/Down Arrow buttons to select On or Off, then

press OK.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 56 57

Pas de commentaire

Vizio E390-B1E - User Manual Manuel d'utilisateur Page 45