Vizio VBR133 Manuel d'utilisateur télécharger pdf (Page 36)

VBR133

Adjusting the Wired Settings

If your player is connected to your home network with an ethernet cable, the

player will automatically detect the connection. You can manually adjust the

settings, but VIZIO recommends this for advanced users only.

To adjust the wired settings:

1. From the Network Menu, use the

Arrow buttons on the remote to

highlight Wired and press OK.

The Wired menu is displayed.

2. Use the Arrow buttons on the remote

to highlight IP Mode and press OK.

Use the Arrow buttons to select Off,

Dynamic, or Manual and press OK.

To change the individual IP settings, IP Mode must be set to Manual.

3. Use the Arrow and OK buttons on the

remote to change each of the IP Mode

settings:

• IP Address

• Subnet Mask

• Gateway

• Primary DNS

• Secondary DNS

If you are unsure what values to enter, contact your Internet Service

Provider (ISP) for assistance.

4. When you are ﬁnished, highlight Apply and press OK.

Viewing the Info Screen

The info screen displays the following information:

• SoftwareVersion

• SoftwareDate

• Interface

• LinkStatus

• MACAddress

• IPAddress

To access the info screen:

1. Turn on the player and your TV. Use

the Arrow buttons on the remote to

highlight Settings and press OK.

The Settings menu is displayed.

2. Use the Arrow buttons on the remote

to highlight Info and press OK.

The info screen is displayed.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 49 50

Pas de commentaire

Vizio VBR133 Manuel d'utilisateur Page 36